The rig is mainly use for diamond bit drilling and carbide bit drilling of solid bed. It also can be use in Underpinning and pile drilling, Geotechnical Surveys drilling and Mineral Exploration drilling etc.
1. Character: <More Picture> |
A. Top hydraulic head driver is droved by two high speed hydraulic motor. It can supply the great torque and the wide range of the rotation speeds. |
|
B. Feeding and the lifting system adopt the hydraulic cylinders driving and chain transmission. It have the long feeding distance and giving the convenient for the drilling. |
C.The V style orbit in the mast can sure the enough rigidity between the top hydraulic head and the mast and give the stability at the high rotation speed.
|
D. Rod unscrew system make the operation simply. |
| E. Hydraulic winch for lifting have the better lifting stability and good braking ability. |
| F. Rotation unit driving system is controlled by the Variable Flux Pump .it has the high efficiency. |
G. Steel Crawlers drive by the hydraulic motor, so the rig has a wide maneuverability. |
H the mast can turn 360oin horizontal direction,90o/-20o in vertical direction. The height can be adjusted at 2500.it can drill hole in any orientations. |
I. The rig hydraulic system control by the proportion valve and the circuit. |
2. Drilling Applications |
| A. when drilling at the deep cracked stratum and the pileup body, back hydraulic driver head joint the DTH-hammer ,forward hydraulic driver head joint the sleeve and rotating to protect the wall of the drilling hole, realizing the quick drilling hole and quick grouting at the complicated stratum. |
B. When drilling at the loose cover stratum, quicksand stratum and silt stratum, the back hydraulic drive head joint the common rotation drilling instrument and the forward hydraulic drive head drive the sleeve rotating to protect the wall of the drilling hole. |
C. when drilling at the integrate stratum ,you can use one hydraulic drive head to realize the rotation drilling and impact rotation drilling. |
3. Specifications |
3.1 Fundamental parameters |
Hole diameter: |
¦Õ110-219 mm |
Rod diameter: |
60£¬89 mm |
Drilling angle: |
all directions |
Overall dimensions (Lx W x H) |
4800X2000X2500 mm |
Rig weight |
9000 Kg |
3.2 rotation unit(hydraulic drive head) |
A. Back hydraulic drive head (drilling rod) |
|
Rotation speed |
Torque |
Single motor |
low speed 0-120 r/Min |
1600 Nm |
|
High speed 0-310 r/Min |
700 Nm |
Double motor |
low speed 0-60 r/Min |
3200 Nm |
|
High speed 0-155 r/Min |
1400 Nm |
B. Forward hydraulic drive head (sleeve) |
|
Rotation speed |
Torque |
Single motor |
low speed 0-60 r/Min |
2500 Nm |
Double motor |
low speed 0-30 r/Min |
5000 Nm |
C. Translation stroke: 2200 Nm |
| 3.3 feeding system: single hydraulic cylinder driving the chain |
Lifting force |
50 KN |
Feeding force |
35 KN |
Lifting speed |
16 M/min |
Feeding speed |
24 M/min |
3.4 Rod Camping System |
Range of the clamping |
50-219 mm |
Clamping force |
6000 Nm |
3.5 Winch for lifting |
Lifting speed |
0.2¡ª0.7 m/s |
Lifting force |
15 KN |
Cable diameter |
12 mm |
Cable length |
50 M |
3.6 Traction mechanism-Steel Crawlers |
Speed in theory: 2.1 Km/h |
Rated drive force 10KNm |
Climb sloping ability: <25¡ã |
Upgrade: |
30¡ã |
Downgrade£º |
20¡ã |
Side turnover angle£º |
35¡ã |
Crawlers widen |
400mm |
Crawlers Center distance |
2260mm |
Ground pressure £º |
¡Ü35KPa |
3.7 ENGINE: Deutz Wind cooling diesel engine 46KW |